1. Composition of production line equipment
1. Hydraulic loading trolley
2. Hydraulic cantilever decoiler
3. Coil pressing and uncoiling device
4. Double roll pinch and plate shearing machine
5. Electric eye control looper table
6. Left and right positioning device
7. Slitting machine
8. Scrap collecting device (with wire arrangement function)
9. Electric eye control looper table
10. Separator device and damping device
11. Hydraulic recoiler
12. Unloading trolley
13. Hydraulic system
14. Electrical system
2. Technical Parameters:
a. Applicable materials: cold rolled, galvanized coil
b. Material quality: domestic standard steel or international
standard steel
c. Material thickness: 0.3-3.0mm,
D. Material width: 500-1250 (Max)
E. Inner diameter of steel coil: φ508 φ610 (rubber band added by
the manufacturer)
f. Outer diameter of steel coil: φ1600(Max)
g. Steel coil weight: 15T (Max)
H. Inner diameter of recoiling: φ508
i. Machine running speed: 130m/min
j. Diameter of slitting blade shaft: φ180 material: 40Cr
k. Longitudinal blade:ф180×ф320×10
l. Material of slitting blade: H13K
3. Specifications:
| Model | Thickness | | Coil Weight | Finished slit | Max Slitting speed |
| MA-1 x 600 | 0.2-1mm | 100-600mm | Max 8T | Min. 20mm | 50m/min |
| MA-2 x 1300 | 0.3-2mm | 300-1300mm | Max 15T | Min. 25mm | 80m/min |
| MA-3 x 1600 | 0.3-3mm | 500-1600mm | Max 20T | Min 25mm | 100m/min |
| MA-4 x 1600 | 0.4-4mm | 500-1600mm | Max 30T | Min 30mm | 80m/min |
Note: The data in the form just as reference according to general
ranges, we always design and make each line according to each
customer’s specific requirements, so each customer can buy his own
well-content line from us.
|
4. Packaging:
Machine will be fixed inside container by steel wire, in order to
make sure it won’t move during transportation and avoid any kinds
of damage of machine and container.
